|
| Shapers - Northtech Shapers - Northtech NT-735-10M Commercial Shaper - W W Thayer Company
Shaper - Northtech NT-735-10M Commercial Series Shaper
Northtech introduces the NT-735-10M Commercial Series Shaper, 10HP, 1-1/4", 4 speed, micro adj. fences, spindle lock and foot brake, massive 37 x 48 table, 6" under nut capacity, 1,600 lbs.
Northtech NT-735-10M Commercial Shaper Literature
| Unit Specifications |
| Spindle diameter |
1", 1-1/4", 1-3/8", 1-1/2" (25.4,30,35,40mm) |
| Spindle Speed |
3000,4500,7500,10000RPM(4speeds) |
| Taper of Spindle |
MK5 |
| Spindle Motor |
7.5 HP (10HP opt) |
| Spindle Travel |
7" (180mm) |
| Spindle capacity under nut |
4", 5-1/2" |
| Max. Table Insert Diameter |
8-5/8'' (220mm) |
| Table Size |
36-1/2" x 48" ( 930 x 1220MM ) |
| Table Height |
35 - 1/2" (900mm) |
| Sliding Table Size |
1050 x 250mm |
| Sliding Table Travel |
38" (970mm) |
| Fence Size |
23-1/2' x 5-3/4" (600 x 146mm) |
| Net weight |
1430bs (650kgs) |
| Gross weight |
1650lbs (750kgs) |
| Packing Dimensions |
53"(L) x 42 "(W) x 51"(H) |
Standard Features:
- Choice of 4 spindle diameters- 1", 1-1/4",
1-3/8", 1-1/2" or choice of metric sizes- 25mm, 30mm, 35mm, 40mm. Spindle has MK5 taper to ensure precision fitting and allow quick changeover of another spindle.
- The spindle is driven by four-speed pulley for spindle speeds of 3000, 4500, 7500 and 10000 RPM. Change of speed is quickly and easily accomplished by simply loosening a lock lever, and shifting the complete assembly.
- The spindle is reversible to ensure safe rotation in clockwise or counter-clockwise direction as well as providing the ability of climb cutting panels.
- The spindle is raised or lowered by a graduated handwheel, providing 0.04" elevation per full revolution of the handwheel. Quick clamp lever positively holds spindle at a required setting.
- Treadle plate provides instant stop of the running spindle after power has been shut off.
- The spindle is fitted with 5 insert rings permitting for use of a wide variety of shaper cutters. Maximum insert opening diameter is 13-1/4", allowing use of insert cutterheads
- Precision machined fence provides the accuracy demanded in complex shaping applications. The fences are supported by a massive cast iron body and integrated with a 5" cast iron dust shroud.
- The massive table is made from high quality cast iron (FC-25 grade), rib reinforced, and temper heat treated for maximum strength and wear resistance. Table surface is precision ground by milling and polished to 0.05mm flatness.
- The tilting spindle provides angle cutting from
-5° ~ 90° ~+45°. Spindle tilting handwheel is located at front within easy reach. A tilt scale is attached for accurate angle setting. A locking handle anchors spindle into fixed angled position.
Options:
- Sliding table system with 8 roller bearings
- tilting spindle assembly(-5 -45)
- Optional 7" undernut spindle with spacers and nut (MK5 series)
- Optional 15HP motor
- Optional 40mm spindle with spacers and nut(MK5 Series)
- M-10 digital LED readout of spindle height(installed)
- DP-727M digital electronic set works with power raise and lower plus 99 positions memory recall
- HSK precision quick change spindle/ chuck system available fall "06"
Lease payment calculator
|
