Shapers - Northfield Double Spindle Shaper - W W Thayer Company
Northfield Double Spindle Shaper - Northfield Shapers
Northfield Double Spindle Shaper - Shapers
Guards, aluminum dust spouts & hand brakes are standard equipment. This shaper is shown with 30" spindle centers.
Northfield Double Spindle Shapers are constructed with rugged iron castings and balanced rotating components to assure vibration free performance. Available with either 24" or 30" between spindle centers. Spindles are available to 1-1/2" diameter and up to 8" in length. TEFC motors to 15 hp can be provided. Under table dust outlet improves dust & chip extraction.
| Machine Specifications |
| Diameter of Spindle (standard machine) |
1" |
| Vertical Adjustment of Spindle |
4-1/2" |
| Length of Spindle at Collar |
5" |
| Size of Table: |
24" center machine |
30" x 60" |
| 30" center machine |
30" x 66" |
| Distance Between Spindles |
24" Std. or 30" |
| Height of Table Top |
34-1/2" |
| Spindle Speed |
8,000 RPM |
| Spindle Rotation |
RH Spindle: Counterclockwise
LH Spindle: Clockwise
|
| Size of Dust Spout |
4" - 4" dust spout requires approx. 400 CFM air flow for dust
collection |
| Horsepower |
3, 5, 7-1/2, 10, 15 TEFC |
| Size of Throat Hole (Standard Machine) |
4-1/2" |
| Floor Space: |
24" center machine |
44" x 60" |
| 30" center machine |
44" x 66" |
| Domestic Shipping Weight |
2000 lbs. |
| Export Shipping Weight |
2300 lbs. |
| Cubic Measure Export Boxed |
96 cu. ft. |
| Voltages |
208, 230/460, 575 3 ph 60 hz |
Extras
- K-50 fence with hold down springs
- Micrometer adjust for K-50 fence
- 3/4, 7/8, 1-1/8, 1-1/4, 1-3/8, 1-1/2 solid spindles
- 6-1/2" spindle length 1, 1-1/8, 1-1/4 solid spindle only
- 8" spindle length 1-3/8, & 1-1/2 solid spindle
- Opposite spindle rotation RH-CW, LH-CCW
- Reversing solid spindle with reversing switch
- Detachable non-reversing spindle screw-on type 3/4, 7/8, 1, 1-1/8, 1-1/4"
- Detachable reversing spindle taper type 3/4, 7/8, 1, 1-1/8"
- 6" front and rear table extensions
- Detachable router top 1/2" hole
- 6000 & 4000 RPM spindle speed
- NEMA 12 electrics with fused disconnect
- 24-volt push-button
- Hand brake in lieu of foot brake
- Switch to disconnect power upon actuation of brake
- Miter gauge and dovetail slot (table ends only)
- Clockwise spindle rotation
- Miter gauge with dovetail slot
- Single phase 3, 5, 7-1/2" hp, 220-volt
- Throat hole and plates available: 8", 6-1/2" and nested
- Modifications to customer's order
Northfield Double Spindle Shaper Literature 
| Manufacturer |
Machine Model |
Manufacturer List Price Starting At |
| Northfield |
Double Spindle Shaper |
$16,890.00 |
Lease
payment calculator
|
