Boring Machines - Delta 32-350 Horizontal Boring Machine - W W Thayer Company

Delta 32-350 Horizontal Boring Machine - Delta

Delta 32-350 Boring Machine - Boring Machines

Model 32-350
Model 32-350 Horizontal Boring Machine with a 1HP, 3450 rpm, 115/230V, single phase motor, (wired for 230V operation); adjustable hold-down clamp with see-thru guard, cast-iron table with dovetailed miter gage slots, miter gage, adjustable stock stop adjustable boring head, drill bit adapter, steel cabinet, foot pedal, dust chute, wrenches and instruction manual.

• Adjustable hold-down clampand boring head are pneumatically controlled by a foot pedal to keep operator's hands free. See-thru guard protects from flying woodchips.
• Heavy cast-iron table features dovetailed miter gage slots for keeping miter gage secured when locked in place. Also with standard-equipped stock stop for operations that require repetitive drilling.
• Loosening the nuts just before the boring head allows the operator to quickly adjust the depth stopfor final drilling depth. Guide rails are concealed inside flexible rubber tubing for protection against dust and chips.
• Tough cast-iron table is mounted on dovetail ways with an adjustable gib. The four bolts located on the right-hand side may be adjusted to compensate for wear.
• Aluminum Boring Head contains two adjustable spindles. Easy-to-read scales and reference lines for accurate setting. Convenient grease fitting accepts standard grease gun for lubricating boring head.
• Built-in chip chut directs dust and debris away from machine.
• Cast-iron carriage supports motor and boring head.
• Adjustable feed rate knob controls boring speed at which the drill bits enter the workpiece.
• Fabricated steel cabinet has bolt-down feet for operating stability.

Motor Speed
• 3450
TABLE TRAVEL TO CENTER OF BIT
• 3 1/2"(89 mm)
MAXIMUM MATERIAL THICKNESS (TABLE TO GUARD)
• 8 1/2"(216 mm)
TABLE SIZE
• 15 3/4" X 9 7/8"(400 X 251 mm)
OVERALL DIMENSIONS
• Length: 37 1/2"(953 mm)
• Width: 15 3/4"(400 mm)
• Height: 48"(1219 mm)
WEIGHT
• 303 lbs.(138 kg.)
Head Travel
• 3 7/8"
Horse Power
• 1 HP
MOTOR
• 1HP, 3450 rpm, 115/230V, 60 Hz., single phase
SPINDLE
• Accepts 7/16" - 14 RH TPI
MAXIMUM BIT DIAMETER WITH SPINDLES AT 3/4" ON CENTER
• 5/8"(15 mm)
DRILL STROKE (CARRIAGE STROKE)
• 3 7/8"(98 mm)
MINIMUM/MAXIMUM CENTER DISTANCE OF SPINDLE
• 3/4" to 3"(19 to 76 mm)
AIR REQUIREMENT
• 90 PSI

Delta 32-350 Horizontal Boring Machine Literature

Lease payment calculator