logo
New and Used Woodworking Machinery and Equipment Since 1946

credit cards
W W Thayer Company
1444 Hoelzer Court
Pacific, MO 63069

1-844-322-5729
 

Window Machinery - Atech

Window Machinery - Atech Vinyl PVC Hot Liquid Profile Bending Machine Fornax

Atech Manual Vinyl (PVC) Hot Liquid Profile Bending Machine Fornax Photo

Atech Manual Vinyl (PVC) Hot Liquid Profile Bending Machine Fornax

Window Machinery Atech Miter Saw Window Machinery Atech Miter Saw Window Machinery Atech Miter Saw Window Machinery Atech Miter Saw















FORNAX Motorized Vinyl (PVC) Profile Bending Machines:

The FORNAX motorized vinyl (PVC) profile-bending machine is designed to bend vinyl profiles including the side lengthening. The machine may also be used to form arches or shapes.

The Basic Units of the Machine:

1-Work Bench
2-Side Lengthening, which may be separated from the machine
3-Bending Moulds, Interior Spades, Distance Gauges
4-A Pull Bench where the Motor is tightened
5-Heater
6-Compass
7-Traction Apparatus
8-Central Compass Lightening
9-Immersion Gravities, which immerses the profiles into oil
10-Draining Tanks
11-Washing Tank
12-Front Trestle Bracket
13-Rear Trestle Bracket

Working bench:

Dimensions: 25 x 1259 x 2800 mm (1" x 50" x 110"), height 830 mm (33")

15 exterior and 15 interior mould holder aluminum square sets are inserted into the T-channels on the work bench to support the bending moulds. The bending moulds may be fixed to a desired diameter by using the compasses. The top spandrel may move to the left or the right approximately 400 mm (16") with the aid of a gear without moving the work bench.

Side lengthening:

The side lengthening may be used to bend arches. The dimensions of the mould holder aluminum square sets assemble placket are 300 x 1600 mm (12" x 63"). The numbers of the internal and external mould holders are 28. To achieve the desirable arch diameter, the side lengthening of the machine may be moved to the right and the left parallel to the working bench with the aid of a gear shaft. To do a bending by using a stencil or without using the side lengthening, a comfortable level is needed for adjusting the distance to the machine.

Bending moulds, interior spades, distance gauges:

The bending moulds and distance gauges are 3000 mm (118") and 2500 mm (98") in length, i.e. 5500 mm (217") in total. The interior padding are manufactured 3000 mm (118") and 4000 mm (157") in length. The materials of the interior padding and bending moulds are heat-resistant, flexible and slippery. The internal paddings are designed to avoid deformation while working with profiles with narrow diameters. Distance gauge aluminum mould holders may bend glass bars without adjustment.

A pull bench where the motor is tightened:

The pull bench is manufactured from profile pipes and may be used to pull the profile into the moulds and to pull out the internal padding out of the profile. The motor is 2-rptated and carries a brake for applying immediate stop. The wheels beneath the main frame are easily adjustable and may be taken out or put back on the machine as required.

Heater:

The heater is made from stainless steel, and has a 2-mm thickness. The 10 kW power allow the heater to supply sufficient temperature for the oil. The temperature control is achieved by digital thermometers and thermostats. It is insulated by a 30 mm thick glass wool, which is covered by stainless steel. This insulation provides a 25% reduction in power use. The steam emission equipment provides the steam coming from the heater, and does not permit its diffusion into the working area. The aspirator may work with a low capacity when the lids are closed. When the lids are opened, it may work at a higher capacity to emit the steam to the exterior environment. The heater has a switch box containing the necessary equipment to operate as needed. The heater level may be adjusted with respect to the workbench. The round rollers in the profile resting pan prevent the heated profiles to rubb on the pan.

Compass:

The compass is used to adjust the mould bender holders to any desired diameter. It has 2 rulers with 1100 mm (43") and a 3100 mm (122") in length.

Pulling apparatus (2 pieces):

This apparatus is used to bend arches without the side lengthening. It is also used to pull the heated profiles into the bending moulds.

Compass and pulling apparatus central lengthening:

This may be used as a central lengthener for extra 950 mm (37").

Gravities:

The gravities are 3 pieces, and they keep the heated profile immersed beneath the surface of the oil. These items are manufactured from stainless steel.

Draining tanks:

These are used to drain the oil remaining inside the profiles. These are 2 pieces and are manufactured from stainless steel. This oil is discharged back to the heater tank to re-use.

Washing tank:

The washing tank is made from stainless with 1.5 mm thickness, and used to wash the bent profiles.

Front trestle bracket:

This is used in order to prevent any deterioration of the exterior parts of the bending mould that hangs loosely from the sides of the working bench.

Rear trestle bracket:

This part may allow the heated profile including its interior padding to be adjusted to the level of work bench.

Window Machinery Atech Miter Saw Window Machinery Atech Miter Saw





Manufacturer Machine Model Stock Number Manufacturer List Price
Atech
Fornax
00001330
$27,500.00

Bookmark us

Choose Manufacture
Featured Woodworking Machinery Types

Boring - CNC, Point to Point
Boring 32mm
Clamp - Carriers - Racks
Clamps - Case Clamps
Clamps - Door Clamps
Clamps - Miscellaneous
Counter Top Machinery
Dovetailers - Dovetail
Downdraft Tables
Dust Collectors
Edgebanders
Feeders
Glue Spreaders - Applicators
Haunchers
Jointers
Laminate Slitters
Laminating - Presses
Material Handling
Miscellaneous
Moulders
Panel Cleaners
Planers
Routers - CNC Router
Routers - Manual
Sanders - Disc - Spindle
Sanders - Edge - Stroke
Sanders - Grinders
Sanders - Misc
Sanders - Wide Belt Sanders
Saw - Aluminum Saw
Saws - Bandsaw - Metal
Saws - Bandsaw - Resaw
Saws - Cut Off Saws
Saws - Gang Rip Saws
Saws - Mitre - Notching Saw
Saws - Panel Saw
Saws - Radial Arm Saw
Saws - Sliding Table Saw
Saws - Straight Line Rip
Saws - Table Saw
Shapers - Shape & Sands
Tenoners
Vacuum Pumps
Window Machinery



Choose Category
Need Assistance?
need assistance
Please Call
844-322-5729


AluminumEquip.com: Aluminum Equipment, Machines and Machinery:
• Aluminum Saw
• Aluminum CNC
• Aluminum Miter Saws
• Compound Miter Saws
• Double Miter Saws
• Precision Miter Saws


ToolsXP.com
Onsrud Cutter Router Bits at Toolsxp.com

Onsrud Cutter CNC Router Bits

• CNC Router Bits
• Spiral Router Bits

Toolsxp.com
FS Tool Saw Blades

FS Tool

• Great Prices
• Free Freight on orders over $200


CNC Router Central for New & Used CNC Routers

5 Axis CNC Router

• 3 Axis CNC Routers
• 5 Axis CNC Routers
• Haas
• Thermwood
• Multicam
• Komo
• CR Onsrud

Aluminum Equipment

Aluminum CNC Machine & Equipment

• Aluminum Saws
• Compound Miter Saws
• Double Miter Saws
• Double Compound Miter Saws
• Aluminum CNC for Extrusions

Woodworking Machinery - Used Woodworking Machinery - Woodworking Equipment and Woodworking Machines
WW Thayer Company offers Equipment to Saw Aluminum - Aluminum Cut Off Saws, CNC Router, Window Equipment,
Wide Belt Sanders, Moulders and Sliding Table Saws
WW Thayer Company - 844-322-5729