New and Used Woodworking Machinery > Saws - Mitre - Notching Saw > OMGA Notching Machine TI-350

Saws - Mitre - Notching Saw - OMGA

Notching Machine, OMGA TI-350, Notching Machine

OMGA Notching Machine TI-350

The TI 350 is specially designed for any kind of Colonial Style window or door grilles, furniture frames, decorative panels and ceilings. The machine is equipped with three cutters to notch the three sides at the same time. The piece is fed forward manually and a spring loaded indexing system allows for precise center-to-center distance between notches. The machine can operate at an approximate rate of 8 cycles per minute. A system of counter profiles prevents any tear out of the finished part. The TI 350 can also prepare the outside frame of the grille on which normally only one side has to be notched. It is in fact possible exclude the top cutter with a selector switch conveniently located in the front control panel. When the components of the outside frame are precut to length, the first center to center distance being normally different from the intermediate ones, the first notch is done by positioning the stick against a length stop. The TI 350 is the ideal system to be coupled with the OMGA Stop, computerizes gauge, to create a very efficient and affordable production cell.