 |
P - Head (adjustable Spiral Cutterhead):
- Steel Body for heavy Planing
- Low Noise fast and efficient stack removal
- With throw-away carbide knives
- Anti-Kickback fingers for safety operation
- Front independent segment pressure shoes for workpiece guidance
|
 |
R - Head (Contact Roller for Calibrating):
- Contact roller with steel or rubber coating in various shore hardness, depending on the sanding job to be preformed.
- Hard rubber coating for precise thickness controlling
- Soft rubber coating for veneer and lacquer sanding
- The contact rollers are adjustable for various abrasive applications
|
 |
K - Head (Pad for Finish Sanding):
- The finish sanding with sanding pad produces high quality surfaces. It can be used in two operating modes.
- Rigid pad (standard)
- Air pad (option) with air filled into pad assembly for increasing finishing effect by the optimum sanding pressure adjusted
- The sanding Pad is height adjustable
|
 |
C - Head (Combination Head):
- This incorporates a combination contact roller and finishing pad with one sanding belt and allows the combined or independant use of both units.
- Rigid pad (standard) / Air cushion pad (option)
- Contact roller and finishing pad are height adjustable
|
 |
T - Head (Polishing Unit):
This unit is very suitable for a high level of the sanding finish on panels, are positioned inside the machine frame each in place of a working unit. Oscillation functioning is standard to effciently complete polishing / cleaning and to increase operational life.
Type of operational material available:
- Scotch-Brite
- Nylon filaments
- Abrasive blade
- Other required
|
 |
Pressure Shoes
Eccentric setting of the level of the pressure unit over the feedtable
|
 |
PC Thickness Controller
Features simple and quick setting to accomplish precise table height adjustment
|
 |
Automatic Device of Feed Belt
(Standard on working width 1100 and 1300 mm) Pneumatic control tracks feed belt automatically to center on the feed table
|
 |
Variable Feed Speed Device
Infinitely variable speed drive affords a complete range of feeding speeds to suit for various kinds of material or paint characteristics
|
 |
Infeed Pressure Device for Cutterhead
Anti-kickback finger, grooved rubber roller and sectional pressure shoe
|
|
Heavy Duty Spiral Cutterhead
The advantages are: longer lasting cutting edge; easy chip discharge; easy set up of knife position and tool assembly; reduced set up time
|
 |
Frequency Inverter
Controlled sanding belt or feed belt speed adjustment. Inverter technology offers greater versatility because of the wider range of speeds available
|
 |
Vacuum Conveyor Table
This device is fitted with a high efficiency electric vacuum fan and is easily operated from the control panel. It allows short and slippery workpiece to feed safely.
|
 |
Cleaning Brush
with drive motor and separate dust extraction hood for workpiece cleaning
|
 |
Floating Table
Floating table for automatic tolerance compensation of thickness differences from workpiece to workpiece
|
 |
Grooved Steel Drum
R unit can also be provided with a grooved steel drum for big stock removal
|
 |
Belt Cleaning
Motorized oscillating blower with interval control for reduction of compressed air consumption
|
 |
Hydraulic Feed Drive
Hydraulic unit guarantees maximum stability and powerful feeding even under heavy load
|
 |
Jumping Device
Air cusion pad and jumping contact roller are electronically controlled to eliminate sand-throughs.
|
