New and Used Woodworking Machinery > Sanders - Wide Belt Sanders > Northtech - 100 Series Wide Belt Sander Manual
Sanders - Wide Belt Sanders - Northtech

NT-KL-36C-ML:
- Manual table Series
- LED digital scale for working height accuracy
- Electronic oscillating of sanding belt (standard)
- Pressure roller coated rubber in the front and rear of sanding head
- Disc brake for rapid shut down of sanding belt ensures full machine protection
- Automatic brake for belt breakage, miss track, and power failure for additional protection
- Overload protection for each motor
- Infinitely variable feed speed of feed mat provides the means for optimum finish
- One Year Bumper-to-Bumper Warranty
C - Combination Head Roller and Pad with One Belt |  |
Allows the combined or independend use of both units for calibrating and finishing. Drum only/platen only or the (2) combined offer ultimate flexibility for all materials. |
Manual Table and LED Series: |
Model | NT-KL-24C-ML | NT-KL-36C-ML | NT-KL-43C-ML |
Working Width | 24" | 36" | 43" |
Sanding Belt Size | 25" x 60" | 37" x 60" | 44" x 60" |
Main Motor | 15HP | 15HP/20HP | 20HP/25HP |
Feed Motor | 1HP | 2HP | 2HP |
Elevator Motor | 0.25HP | 0.25HP | 0.25HP |
Feed Speed | 13-49FPM | 13-49FPM | 13-49FPM |
Net Weight | 1850 | 2560 | 2980 |
 |
Jack Screw 4 precision jack screws incorporate slide bracket to insure conveyor movement is stabilized |
 |
Conveyor Driving Roller Employed with rubber coating to eliminate possible slipping of feed carpet |
 |
Large Infeed Support Table Rubber coated infeed support idle roller provides additional material support and will not mark. Infeed table helps support large frames and glued panels. |
 |
High Quality Electronic Components The electrical control box consists of high quality electronic components ensuring maximum dependability of control performance and long service life. Neat wiring in the control box provides for convenient maintenance. |
 |
Variable Feed Speed Device Mechanical variable speed and gear reduction drive (13' ~ 49' min.) provides full flexibility for any sanding environments. |
 |
Control Panel
The Control panel features east to follow graphic design switches. Start/stop buttions, emergency button and signal lamp of safety device are all standard on the 100 series sanders. The DP-525 electronic positioning controls are higly accurate and user friendly. |
 |
Wide Sanding Pad Northtech's precision milled polishing platen assembly is fully adjustable. Standard 55mm/2-1/4" with platen is graphite backed and provides the ultimate means of fine sanding with finer paper or cloth grit abrasives. Also allows veneer sanding capabilities in a cost affordable sanding machine. |
Manufacturer | Machine Model |
Stock Number |
Northtech | 100 Series Manual |
00001420 |
|