New and Used Woodworking Machinery > Sanders - Wide Belt Sanders > Northtech - 100 Series Wide Belt Sander RC Automatic
Sanders - Wide Belt Sanders - Northtech

NT-KL-36RC-A:
- Power table - Raise and Lower
- Microcomputer DP-525 working thickness controller allows exact table positioning with simple key pad entry
- Japanese photo electric tracking system guarantees repetitive belt tracking for all abrasive belt types
- Pressure rollers are rubber coated and positioned prior to and after each drum and platen station
- Disc brake for rapid shut down of sanding belt ensures full machine protection
- Automatic brake for belt breakage, miss track, and power failure for additional protection
- Overload protection for each motor
- Infinitely variable feed speed of feed mat provides the means for optimum finish
- Four precision jack screws ensure emplete parallel relationship to the sanding options
RC - Double Head - Adjustable contact roller and/or finishing pad |  |
Dual station sander can allow up to 200% savings on labor, especially with regards to calibration and finish sanding of glued panels. Increased HP available |
Automatic Table: |
Model | NT-KL-24RC-A | NT-KL-36RC-A | NT-KL-43RC-A |
Working Width | 24" | 36" | 43" |
Sanding Belt Size | 25" x 75" | 37" x 75" | 44" x 75" |
Main Motor | 10/15HP | 20/15-25/20 (opt) | 30/20 (opt) |
Feed Motor | 1HP | 2HP | 2HP |
Elevator Motor | 0.25HP | 0.25HP | 0.25HP |
Feed Speed | 13-49FPM | 13-49FPM | 13-49FPM |
Net Weight | 2700 | 3690 | 4200 |
 |
Jack Screw 4 precision jack screws incorporate slide bracket to insure conveyor movement is stabilized |
 |
Conveyor Driving Roller Employed with rubber coating to eliminate possible slipping of feed carpet |
 |
Large Infeed Support Table Rubber coated infeed support idle roller provides additional material support and will not mark. Infeed table helps support large frames and glued panels. |
 |
High Quality Electronic Components The electrical control box consists of high quality electronic components ensuring maximum dependability of control performance and long service life. Neat wiring in the control box provides for convenient maintenance. |
 |
Variable Feed Speed Device Mechanical variable speed and gear reduction drive (13' ~ 49' min.) provides full flexibility for any sanding environments. |
 |
Control Panel
The Control panel features east to follow graphic design switches. Start/stop buttions, emergency button and signal lamp of safety device are all standard on the 100 series sanders. The DP-525 electronic positioning controls are higly accurate and user friendly. |
 |
Wide Sanding Pad Northtech's precision milled polishing platen assembly is fully adjustable. Standard 55mm/2-1/4" with platen is graphite backed and provides the ultimate means of fine sanding with finer paper or cloth grit abrasives. Also allows veneer sanding capabilities in a cost affordable sanding machine. |
Manufacturer | Machine Model |
Stock Number |
Northtech | 100 Series RC Automatic |
00001425 |
|