Shapers - Northtech Shapers - Northtech NT-735L Commercial Shaper - W W Thayer Company
Shaper - Northtech NT-735L Commercial Series Shaper
Northtech introduces the NT-735L Commercial Series Shaper, 10HP, 1-1/4", 4 speed, micro adj. fences, spindle lock and foot brake, massive 39 x 98-1/2" table, 6" under nut capacity, Telescoping tenoning table. The unit is identical to the NT-735M but is equipped with a 88" long tenoning table for maximum support of large parts and doors. Telescopic front table extension wing facilitates maximum support of large doors, panels and timbers. (Extends to 28" from the main shaper table)
Northtech NT-735L Commercial Shaper Literature
| Unit Specifications |
| Spindle diameter |
1", 1-1/4", 1-3/8", 1-1/2" (25.4,30,35,40mm) |
| Spindle Speed |
3000,4500,7500,10000RPM(4speeds) |
| Taper of Spindle |
MK5 |
| Spindle Motor |
7.5 HP (10HP opt) |
| Spindle Travel |
7" (180mm) |
| Spindle capacity under nut |
4", 5-1/2" |
| Max. Table Insert Diameter |
8-5/8'' (220mm) |
| Table Size |
39" x 88" ( 980 x 2235MM ) |
| Table Height |
35 - 1/2" (900mm) |
| Sliding Table Size |
1050 x 250mm |
| Sliding Table Travel |
38" (970mm) |
| Fence Size |
23-1/2' x 5-3/4" (600 x 146mm) |
| Net weight |
1798bs (817kgs) |
| Gross weight |
1975lbs (898kgs) |
| Packing Dimensions |
91"(L) x 44"(W) x 51"(H) |
Standard Features:
- Choice of 4 spindle diameters- 1", 1-1/4",
1-3/8", 1-1/2" or choice of metric sizes- 25mm, 30mm, 35mm, 40mm. Spindle has MK5 taper to ensure precision fitting and allow quick changeover of another spindle.
- The spindle is driven by four-speed pulley for spindle speeds of 3000, 4500, 7500 and 10000 RPM. Change of speed is quickly and easily accomplished by simply loosening a lock lever, and shifting the complete assembly.
- The spindle is reversible to ensure safe rotation in clockwise or counter-clockwise direction as well as providing the ability of climb cutting panels.
- The spindle is raised or lowered by a graduated handwheel, providing 0.04" elevation per full revolution of the handwheel. Quick clamp lever positively holds spindle at a required setting.
- Treadle plate provides instant stop of the running spindle after power has been shut off.
- The spindle is fitted with 5 insert rings permitting for use of a wide variety of shaper cutters. Maximum insert opening diameter is 13-1/4", allowing use of insert cutterheads
- Precision machined fence provides the accuracy demanded in complex shaping applications. The fences are supported by a massive cast iron body and integrated with a 5" cast iron dust shroud.
- The massive table is made from high quality cast iron (FC-25 grade), rib reinforced, and temper heat treated for maximum strength and wear resistance. Table surface is precision ground by milling and polished to 0.05mm flatness.
- The tilting spindle provides angle cutting from
-5° ~ 90° ~+45°. Spindle tilting handwheel is located at front within easy reach. A tilt scale is attached for accurate angle setting. A locking handle anchors spindle into fixed angled position.
Options:
- Sliding table system with 8 roller bearings
- tilting spindle assembly(-5 -45)
- Optional 7" undernut spindle with spacers and nut (MK5 series)
- Optional 15HP motor
- Optional 40mm spindle with spacers and nut(MK5 Series)
- M-10 digital LED readout of spindle height(installed)
- DP-727M digital electronic set works with power raise and lower plus 99 positions memory recall
- HSK precision quick change spindle/ chuck system available fall "06"
Lease payment calculator
|
