New and Used Woodworking Machinery > Dovetailers - Dovetail > Mereen Johnson 1105 CNC Dovetailer

Dovetailers - Dovetail - Mereen Johnson

Mereen Johnson 1105 CNC Dovetailer, Mereen Johnson 1105 Dovetail Machine

Show all Mereen Johnson 1105 CNC Dovetailer photos

Mereen Johnson 1105 CNC Dovetailer

Machine:Dovetailer - Dovetail Machine
Brand: Mereen Johnson
Model Number:1105-E CNC Dovetailer
Year of Manufacture: 2007

• Mereen Johnson 1105-E CNC Dovetailer will machine finger type dovetails in drawer sides, fronts and backs. Drawer sides machined in pairs, fronts and backs one at a time; Dovetails are on 1" centers. Drawer parts are hand positioned and automatically clamped. 3 second change over from side panels to fronts or backs. Tool compensation to maintain constant joint size. No cams to change or set
• (1) 5 HP TEFC motor with air tensioned "Esband" belt driving 5 counter rotating spindles to 20,000 RPM
• Material thickness is ½" to 5/8" on standard drawer boxes, 3/4" thickness capability with optional guide, up to 3/4" maximum overhang for lipped fronts. Drawer height is 1-3/4" to 15", width is 5" to 48" and depth is 7" to 28"
• "X" / "Y" Axes individually driven by AC Brushless servo motors coupled to thrusted ball screws. Car-riages mounted on THK type linear rails with dust baffling
• Fronts - Backs Clamp: Linatex covered clamp mounted on a linear actuator. Thickness adjustment integrated with CNC programming
• Sides Clamp: Table clamp mounted on two (2) linear actuators. Thickness adjustment integrated to CNC programming. Phenolic chip breaker on both sides of parts, with vertical adjust for tenon height
• Individually replaceable cartridge type spindles with top and bottom double angular contact bearings. Full diameter spindles on 2" centers
• (1) 4" diameter dust collection points, 440 cfm required, based on 5000 fpm velocity and 4" w.g
• Control console with lighted P.B.s and computer interface

FOB Pacific, MO

Mereen Johnson 1105 CNC Dovetailer Specifications