|
New and Used Woodworking Machinery > Moulders > Leadermac Smartmac Series Moulder
Moulders - Leadermac

Powerful, Precise, Efficient, & Economical Moulder
- Full Sound & Safety Enclosure includes lighting fixtures.
- One-piece, cast iron heavy machine frame is specially heat treated for standard configurations.
- Motorized vertical adjustment of feed beam
- More Full Width Top & Bottom Driven Rolls then most competitors
- Feed System is Chainless Heavy Duty Cardan Shaft with very heavy gearboxes and universals
- Fast variable feed speeds of up to 78 fpm (24mpm) are standard – higher speeds optional
- Precision Spindle Assemblies each include 4 Precision Bearings for high tolerances
- Spindles Speeds are std. 6,000 rpm and 7,200 rpm are optional
- Adjustment of each spindle can be easily performed using front adjustments.
- Each Horizontal spindle is driven by an individual motor & Side Heads share a common motor
- Pneumatic pressure of feed rollers can be easily set to assist smooth feeding. Separate controls for top Infeed, Midfeed & Outfeed Rolls.
- Hard-Chrome Plating throughout all Table Surfaces, Chip Breakers, Pressure Plates and Main Guide.
- Dual Digital Counters on Near Side Head & Top Head Radial set & Mechanical Digital Readouts for all heads Axial and Radial, the pressure plates & Top Head Chip Breaker
- 1 Shot Table Lube System
- Central lubrication system - lubrication points located from front of machine.
- Complete set of cutter heads
- Electrics to UL/CSA Standards and are 230/460 or 575/3/60 or 380/415/3/50 as desired – can convert to single phase optional
Available Options:
- Auto Bed Lube
- REC Setworks Programmable controller for convenient thickness and or width of cut settings.(optional)
- Universal Head (optional)
- Pneumatic Pressure to Top Head chip Breakers &/or Side Head Holdover Rolls
- To CE Standards if desired
Standard Machine Specifications |
Working Width |
0.78"- 7", 8", or 9.1" |
Working Thickness |
10 ~ 125mm (.39" ~ 5"); 0.25" optional |
Number of Spindles |
1 to 5 |
Motor Capacity per spindle |
5 HP ~ 15 HP |
Spindle Speed |
6000 RPM (7200 RPM optional) |
Spindle Diameter |
1 13/16”, 40mm (1.6"), 1 ½” or 50mm |
Feed speed, infinitely variable |
6 ~ 24 m/min (19.5 ~ 78 FPM) |
Adjustment Range: infeed table and edge-jointing fence |
10mm (0.4") |
Length of the straightening table |
78" (2m), 98" (2m), or 120" (2.5m) |
|
|
Pneumatic controls allowing individual setting for infeed, midfeed, and outfeed rolls, and controls for pneumatic side head hold over and pneumatic chipbreakers |
Centrally located lubrication to all critical points |
|
|
Control panel, variable feed control, infeed table with adjustments, infeed hold over roll, and manual lubricator |
Anti double up gate, Pneumatic side pressure unit opposite fence side head, short stock roll position in down position (flips up out of the way for easy access to side head) |
|
|
Pneumatic Chip Breakers on top head. Multiple Top powered feed Rolls and 2 Full width powered Bottom Feed rolls |
Dual mechanical readouts for quick set up on top and near side head |
|
|
Cardan shaft drive, showing very heavy duty gear boxes, universal joints, and TECO-Westinghouse Motors. |
Smartmac Precision spindle with 4 Precision ABEC 6 bearings ensuring accuracy and longevity. |
Manufacturer | Machine Model |
Stock Number |
Leadermac | Smartmac Series |
00001606 |
|