New and Used Woodworking Machinery > Moulders > Leadermac Platinum Series Moulder

Moulders - Leadermac

Moulder, Leadermac Platinum Series, Moulder

Leadermac Platinum Series Moulder

Outstanding Features:

• Full Sound & Safety Enclosure.
• One-piece, cast iron machine frame
• Extra Heavy Feed Beam supported at each end of the beam on 2 large supporting columns(at each end) and includes Motorized vertical adjustment of feed beam
• Feed System is Full HD Cardan Shaft with very heavy gearboxes and universals
• More Powered Top & Full Width Bottom Rolls then most of our competition
• Feed speeds of up to 100 fpm (30mpm) are standard.
• Pneumatic pressure of the Top Feed Rolls can be easily set to provide an the best feed roll pressure. Separate Pressure controls for top Infeed, Midfeed & Outfeed Rolls
• Pneumatic Pressure – easily adjusted to Side Head Holdover Rolls as well as the Top Head Chipbreaker(s)
• Precision Spindle Assemblies each including 4 Precision ABEC 7 Bearings for highest tolerances
• Spindles Speeds are std. 7,200 rpm and 8,000 rpm is optional
• Adjustment of each spindle can be easily performed using the front adjustment control.
• Each spindle is driven by an individual motor for powerful machining and easy control.
• Hard-Chrome Plating (approx. 008” thickness) Table Surfaces, Chip Breakers, Pressure Plates and Main Guide for maximum wear resistance.
• Dual Digital Counters on Near Side Head & Top Head(s) Radial Set & Digital Readouts for all heads Axial and Radial as well as counters on Chip Breakers & Pressure Plate(s).
• Automatic Table Lube System included
• Central lubrication system - lubrication points located from front of machine.
• Electrics to UL/CSA Standards and are 230/460 or 575/3/60 – can convert to single phase optional

Available Options:

• 10.2”, 12” or 13” Width and/or 8” or 10” Thickness
• REC Setworks Programmable controller for convenient thickness and or width of cut settings.(optional)
• Quik Axial Set of 4” (100mm) adjustment to the side heads – so that you can stack heads on top of each other for quick pattern changes
• Hydro-Loc Outboards for horizontal spindle support on wider machines
• Grooved Beds for very Short Stock Feeding
• Universal Head or Rip Attachment is optional
• CE Specifications and 380 or 415/3/50 electrics also available

Pneumatic controls allowing individual setting for infeed, midfeed, and outfeed rolls, and controls for pneumatic side head hold over and pneumatic chipbreakers.	Centrally located lubrication point to all critical points
Control panel, variable feed control, infeed table with adjustments, infeed hold over roll, and automatic lubricator	Anti double-up gate, Pneumatic side pressure unit opposite fence side head, short stock roll position in down position (flips up out of the way for easy access to side head)
Pneumatic Chip Breakers on top heads. Close coupling and multiple powered top feed rolls and full width powered bottom feed rolls.	Dual mechanical readouts (electronic optional) for quick set up on top and near side head. REC Setworks available for Near side and Top head quick setting.
Cardan shaft drive, showing very heavy duty gear boxes, universal joints, and TECO-Westinghouse Motors.	Cutaway of Compact Precision spindle with 4 Precision ABEC 7 bearings ensuring accuracy and longevity.
Automatic bed lubricator -->
Optional REC Setworks controls installed on near side head and two top heads for fast and easy set up.	Optional Axial set system for servo setting of vertical positioning of side heads with 100mm (4") of movement for stacking side heads.