|
New and Used Woodworking Machinery > Moulders > Leadermac Compact Series Moulder
Moulders - Leadermac

Outstanding Features:
- Full Sound & Safety Enclosure
- One-piece, cast iron machine frame is specially heat treated for std. configurations.
- Extra Heavy Feed Beam supported at each end of the beam on 2 large support columns
- Feed System is a Heavy Duty Cardan Shaft with very heavy gearboxes and universals
- More Powered Top & Full Width Bottom Rolls then most of our competition
- Pneumatic pressure of the Top Feed Rolls can be easily set
- Pneumatic Pressure to Side Head Holdover Rolls as well as the Top Head Chipbreaker(s)
- Precision Spindle Assemblies each including 4 Precision Bearings for highest tolerances
- Spindles Speeds are std. 6,000 rpm and 7,200 rpm is optional
- Each spindle is driven by an individual motor
- Hard-Chrome Plating Table Surfaces, Chip Breakers, Pressure Plates and Main Guide
- Dual Digital Counters on Near Side Head & Top Head(s) Radial Set & Digital Readouts for all heads Axial and Radial as well as counters on Chip Breakers & Pressure Plate(s).
- Automatic Table Lube System included
- Central lubrication system
- Complete set of cutter heads
- Electrics to UL/CSA Standards and are 230/460 or 575/3/60 – con convert to single phase optional
Available Options:
- 10.2”, 12” or 13” Width and/or 8” or 10” Thickness
- REC Setworks Programmable controller for convenient thickness and or width of cut settings.(optional)
- Hydro-Loc Outboards for horizontal spindle support on wider machines
- Grooved Beds for very Short Stock Feeding
- Universal Head or Rip Attachment is optional
- CE Specifications and 380 or 415/3/50 electrics also available
Standard Machine Specifications |
Working Width |
0.78"~9.1” 10.2", 12" or 13" (20-230mm, 160mm, 300mm or 330mm) |
Working Thickness |
0.39"-6", 8” or 10”; 1/4” opt. (10-150mm,200mm or 250mm) |
Number of Spindles |
1 - 9 |
Motor Capacity per spindle |
7.5HP to 20HP |
Feed motor |
5HP (standard) |
Spindle Speed |
6000 or 7200 RPM |
Spindle diameter |
1 13/16”, 40mm(1.6"), 1 ½” or 50mm |
Feed speed, infinitely variable |
85 FPM (25 m/min) |
Length of the infeed table |
78.7" (2m); 98” (2.5m) or 120” (3m) |
|
|
Pneumatic controls allowing individual setting for infeed, midfeed, and outfeed rolls, and controls for pneumatic side head hold over and pneumatic chipbreakers. |
Centrally located lubrication point to all critical points |
|
|
Control panel, variable feed control, infeed table with adjustments, infeed hold over roll, and automatic lubricator |
Anti double-up gate, Pneumatic side pressure unit opposite fence side head, short stock roll position in down position (flips up out of the way for easy access to side head) |
|
|
Pneumatic Chip Breakers on top heads. Close coupling and multiple powered top feed rolls and full width powered bottom feed rolls. |
Dual mechanical readouts (electronic optional) for quick set up on top and near side head. REC Setworks available for Near side and Top head quick setting. |
|
|
Cardan shaft drive, showing very heavy duty gear boxes, universal joints, and TECO-Westinghouse Motors. |
Cutaway of Compact Precision spindle with 4 Precision ABEC 6 bearings ensuring accuracy and longevity. |
Manufacturer | Machine Model |
Stock Number |
Leadermac | Compact Series |
00001607 |
|