|
New and Used Woodworking Machinery > Dust Collectors > Dantherm Filtration Dust Collectors S-Bag Filter
Dust Collectors - Dantherm
| 1,500 - 6,000 CFM |
- Three phase (single phase option)
- Easy Installation
- Small footprint
- Multiple U.S. Assembly points
|
- Quiet Operation
- Bag material collection (barrel or bin option.)
- Patented SuperBags (99.9% efficiency)
|
During Normal Operation
1. During normal operation, the dust laden air from the plant travels down the suply duct (1)
2. The dirty air then enters the COMBIFAB (2) material handling fan
3. The dust then enters the hopper section (5) of the filter
4. As air slows down within the hopper, the heavier dust particles fall down into the inside of the collection bags (6)
5. The remaining dust then travels up into the inside of the filter bags (4)
6. The air, which originated from the plant, is now clean and passes through the filter bag into the surrounding atmosphere (3) |
 |
While Cleaning
1. The S Series may only clean "off-line" when the COMBIFAB fan (2) has stopped rotating
2. The S Series is cleaned by applying physical force to the outside of the filter bag (4) which, in effect, shakes them
3. The dust cake, which hangs on the inside of the filter bag, falls into the hopper section and then into the collection bags below (6)
|  |
S-500 Series |
|
Basic Model Features
- 162 Sq Ft of filter media
- Easy installation
- Quiet Operation
- Two waste discharge points
- Qty (1) 5 HP, 1750 RPM, TEFC motor
- Qty (16) Beane material filter bags
- Qty (2) plastic waste collection bag
- Qty (2) clamps for easy removal of waste bags
CFM RANGE
| 8.0" Wg | 7.5" Wg | 5.0" Wg |
| 1500 CFM | 2000 CFM | 3000 CFM |
Shipping Weight: 675 lbs.
| Model Number Selection: |
| Model | Phase | Starter | Dust discharge |
| S500 | -_______ | -_______ | -_______ |
| 1 | 115 (115V) | O (Std. Bag) |
| 208 (208V) | B (2 Barrel) |
| 230 (230V) |
| S500 | -_______ | -_______ | -_______ |
| 3 | 208 (208V) | O (Std. Bag) |
| 230 (230V) | B (2 Barrel) |
| 460 (460V) |
| 575 (575V) |
|
S-750 Series |
|
Basic Model Features
- 243 Sq Ft of filter media
- Easy installation
- Quiet Operation
- Three waste discharge points
- Qty (1) 7.5 HP, 1750 RPM, TEFC motor
- Qty (24) Beane material filter bags
- Qty (3) plastic waste collection bag
- Qty (3) clamps for easy removal of waste bags
CFM RANGE
| 10.0" Wg | 8.0" Wg | 6.0" Wg |
| 2500 CFM | 3500 CFM | 4500 CFM |
Shipping Weight: 900 lbs.
| Model Number Selection: |
| Model | Phase | Starter | Dust discharge |
| S750 | -_______ | -_______ | -_______ |
| 1 | 115 (115V) | O (Std. Bag) |
| 208 (208V) | B (3 Barrel) |
| 230 (230V) | D (Dump Bin) |
| S750 | -_______ | -_______ | -_______ |
| 3 | 208 (208V) | O (Std. Bag) |
| 230 (230V) | B (3 Barrel) |
| 460 (460V) | D (Dump Bin) |
| 575 (575V) |
|
S-1000 Series |
|
Basic Model Features
- 360 Sq Ft of filter media
- Easy installation
- Quiet Operation
- Three waste discharge points
- Qty (1) 10 HP, 1750 RPM, TEFC motor
- Qty (24) Beane material filter bags
- Qty (3) plastic waste collection bag
- Qty (3) clamps for easy removal of waste bags
CFM RANGE
| 8.0" Wg | 7.0" Wg | 6.0" Wg |
| 4000 CFM | 5000 CFM | 6000 CFM |
Shipping Weight: 950 lbs.
| Model Number Selection: |
| Model | Phase | Starter | Dust discharge |
| S1000 | -_______ | -_______ | -_______ |
| 3 | 208 (208V) | O (Std. Bag) |
| 230 (230V) | B (3 Barrel) |
| 460 (460V) | D (Dump Bin) |
| 575 (575V) |
|
The Dantherm Difference |
| Before: |
|
| After: |
|
| Dump Bin for the S-Series |
Dimensions:
- Overall 33.0" wide x 70.5" long x 36.5" high
- Inside 29.0" wide x 66.5" long x 27.5" high
Weight: 500 lbs.
Volume: 230 gallon
[70% increased capacity over a (3) barrel outlet]
barrels are 45 gallon each |
 |
| Manufacturer | Machine Model |
Stock Number |
| Dantherm | S-Bag Filter |
00001481 |
Call for a competitive quote at 1-800-323-7430
| 
