Chip deflector in down position for sanding edges	Chip deflector in up position for use with router

This table has a very unique feature: all of the inlet air enters the table through a long slot on each side. One side may be closed, which doubles the suction on the open side, a great feature when routing or with the removal of large amounts of dust. A highlight of this unit is the chip deflector (shown in close up pictures), which is mounted on hinges and held in the upright position by two magnets. As a piece is being routed, the router chips hit the deflector then are sucked down into the machine. The deflector can quickly be swung up into position or down out of the way. Because this machine's air enters into each side, it is great for sanding any large product: house doors, table tops, counter tops, etc. It also works very well in any small parts application. The drop down edge allows edges of products to be easily sanded. The top of this table is set deep enough that counter sink bowls can be positioned inside the machine, allowing unlimited access to the counter top's edges.

Denray 3696SS 36" x 96" Down Draft Table

Lease payment calculator