Shape Sand - CTD CDM-300 Compound Double End Trim and Miter Saw - W W Thayer Company

CTD CDM-300 Compound Double End Trim and Miter Saw

Show all CTD CDM-300 Compound Double End Trim and Miter Saw photos

CTD CDM-300 Compound Double End Trim and Miter Saw

Machine: Compound Double End Trim and Miter Saw
Brand: CTD
Model Number: CDM-300

• Compound Double End Trim and Miter Saw with (2) belted motor drive heads , 3 HP each, 3450 RPM - left hand fixed and right hand moveable on rack and pinion up to 8’ width capacity, each with 12” diameter x 1” bore blade capacity, includes cut length measuring tape which reads left to right
• 90° Straight Cutting capacity - 3” (76mm) High x 8” (203mm) Wide
• 45° Mitre Cutting capacacity - 3” (76mm) High x 5-1/2” (140mm) Wide
• 90° Front to Back Cut/45° Compound Cutting capacity – 1-1/2” (38mm) High x 8-1/2” (216mm) Wide
• Table: Each saw head swivels from 90º to 45º towards each other with degree markings and pointer, positive pin stops at 90° and 45°, includes phenolic chipbreaker
• Compound of tilting angle: Each saw head will compound angle cut up to 45° in direction shown with positive pin stops at 90°, 22-1/2° and 45°, bottom of blades point to each other, saw will also cut up to 10° on other side of vertical plane
• Fences positioned on each side of blade are keyed to base and are easily adjustable front to back and side to side
• (2) Inside air actuated vertical clamps, tripped by foot valve
• (4) 4” diameter dust outlets, 900 CFM required per head
• Production rates – up to 10 strokes per minute
• Currently wired 230 volt, 3 phase, 60 cycles

FOB Pacific, MO

CTD CDM-300 Compound Double End Trim and Miter Saw Specifications