Serving the Industrial Woodworkers since 1946

W W Thayer Company
1444 Hoelzer Court
Pacific, MO 63069
1-800-323-7430
 
Choose Manufacture
Machinery

Boring - CNC, Point to Point
Boring 32mm
Clamp - Carriers-Racks
Clamps - Case
Clamps - Door
Clamps - Miscellaneous
Counter Top Machinery
Dovetailers
Downdraft Tables
Drill Presses
Dust Collectors
Edge Banders - T Banders
Feeders
Glue Spreaders - Applicators
Haunchers
Hogs - Scrap Grinders
Jointers
Laminate Slitters
Laminating
Material Handling
Milling Machines
Miscellaneous
Moulders
Panel Cleaners
Planers
Routers - CNC
Routers - Manual
Sanders - Disc - Spindle
Sanders - Edge - Stroke
Sanders - Wide Belt - Drum
Saws - Bandsaw-Resaw
Saws - Bandsaw-Metal
Saws - Cold
Saws - Cut Off
Saws - Mitre
Saws - Gang Rip
Saws - Panel
Saws - Radial Arm
Saws - Sliding Table
Saws -Straight Line Rip
Saws -Table
Shapers - Shape & Sands
Stair Trencher
Tenoners

CNC Router - CR Onsrud 145G-18 - W W Thayer Company

CR Onsrud 145G-18 CNC Router, 5'x 12' Table

Show all CR Onsrud 145G-18 CNC Router photos

 

 

CR Onsrud CNC Router, 145G-18 5 x 12 Table

Machine: CNC Router
Brand: CR Onsrud
Model Number: 145G-18
Year of Manufacture: 2007

  • Moving Gantry Machine with 61” x 145” phenolic work table, (3) vacuum zones 60” x 48” each; includes all switches, valves, and interlocks necessary for either suck through or dedicated spoil boards, and is easily modified for the use of pod systems; 16’ x 8’ Footprint
  • X axis travel = 146”, Y axis travel = 62”, Z axis programmable travel = 11”, 14” under bridge, Programmable feed rates with override capability – X and Y axis = up to 2000 inches per minute
  • 18 HP Fully programmable HSD router spindle – HSK-63F type ATC; variable speed from 0 - 18,000 RPM, capable of routing and drilling, collet size capacity 1/8” to 1”
  • (12) Position Automatic Tool Changer (HSK-63F type)
  • Closed loop brushless AC Servo drive system with precision ground ball screws, all axes ride on linear profiled precision guideways
  • Onsrud AMC - B and R Handheld Machine controller is compatible with virtually all CAD/CAM packages that generate standard M & G codes
  • Full 3D capability, 4 Port Network Hub, feed rate and spindle speed override while cutting, inch/metric operation, 32 bit RISC processor with 115,000 baud download capability
  • (1) Dekker 40 HP Liquid Ring Vacuum Pump
  • 20 KVA Federal Pacific Isolation Transformer, used as an electrical noise filter, (6) tap non-compensating transformer for constant machine voltage
  • Factory Prewire and retrofit kit - allows retrofit of C axis ability with with aggregase, or 9 Spindle drilling block

FOB Pacific, MO

CR Onsrud 145G-18 CNC Router Specification Sheet